EPS Fully Automatic Intermittent Intelligent Pre-expansion Machine (Type A)
Features
|
•Decompression system Adopt imported pressure reducing valve, equipped with imported steam-water separator and filter to ensure that the steam system is more stable. |
•Weighing system Imported load cells are used to precisely control the input of raw materials, and the weight can be accurate to 0.05kg. |
|
•Valve All valves are imported from Germany, the angle seat butterfly valve is German Gemi, and the proportional valve is German Baode to ensure the stability of the equipment. |
•Material level control system The vibration level meter imported from Germany is used to accurately sense the foaming particles to ensure the most precise foaming accuracy. |
|
•Spindle frequency conversion The spindle adopts imported frequency converter, and the spindle speed can be adjusted according to the raw material process, and at the same time, the material level gauge can control the foaming density more accurately. |
Different raw materials have different models. After the foaming is adjusted, it can be stored and exported, which is convenient for direct transfer when the same raw materials are sent again. |
|
•breathable board The wedge-shaped vent plate is used to ensure low pressure and large flow of steam. At the same time, compared with the traditional pre-engine vent plate, it is not easy to block the gas groove. |
•Fluidized bed ventilation The plate adopts the oblique discharge and ventilation method to ensure that the discharge of the fluidized bed is completely clean and no residue is left when the machine is shut down. |
|
•Host insulation Adopt 8 cm thick insulation, cool down slowly, reduce condensed water, and save more energy. |
•Fluidized bed The stainless steel wire drawing board is used to ensure long-term rust-free, and at the same time, the large volume ensures more sufficient aging and makes the foam particles more stable after foaming. |
|
•Electrical control Adopt Siemens 1200PLC control system, cooperate with German imported pressure sensor, temperature sensor and other imported sensors, so that the foaming conditions can be accurately controlled to realize automatic production and stable performance. The large display screen enables the process flow and parameters to be presented at the same time, making the operation more clear. |
•Steam intake and exhaust system The air intake adopts imported Baode proportional valve, which precisely controls the steam intake, ensures the constant pressure foaming of the barrel, and makes the foaming process more stable. The air-conditioning proportional valve can precisely control the temperature to ensure the constant pressure of foaming. On the basis of constant temperature control, the foaming is more stable and accurate. |
Technical parameter
|
Number |
Name |
unit |
Parameters |
||
|
1 |
Cylinder |
mm |
ф1600--ф2000 (inner diameter) × 2600 |
||
|
2 |
Effective volume |
m³ |
6.0 |
||
|
3 |
steam |
Entrance |
mm |
Primary decompression DN80/Secondary decompression DN65 |
|
|
work pressure |
Mpa |
0.5-0.6 |
|||
|
4 |
compressed gas |
Entrance |
mm |
DN65 |
|
|
work pressure |
Mpa |
0.5-0.65 |
|||
|
5 |
outlet |
upper exhaust |
mm |
DN150 |
|
|
under drain |
mm |
DN65 |
|||
|
6 |
Installed power |
Spindle motor |
kW |
18.5 |
|
|
Discharge fan |
kW |
5.5 |
|||
|
drying motor |
kW |
11 |
|||
|
Feeding fan |
kW |
15 |
|||
|
crushing fan |
kW |
1.1 |
|||
|
Flip motor |
kW |
2.2 |
|||
|
Feeding motor |
kW |
3
|
|||
|
Foaming efficiency |
12g/l |
|
2350~2500kg/h |
||
|
15g/l |
2750~3000kg/h |
||||
|
18g/l |
3250~3400kg/h |
||||
|
20g/l |
3500~3750kg/h |
||||
|
25g/l |
3750~4050kg/h |
||||
|
8 |
The gram weight error is less than |
12~25g/L |
≤±2% |
||
|
9 |
Floor space L×W×H |
M |
10000×3500×6000 |
||
|
10 |
weight |
T |
8.6T |
||
EPS automatic intermittent intelligent pre-engine combined optional equipment
screw feeder Decompression System |
Germany speck vacuum system Weighing System |
Automatic density weighing feedback system Drororesssn System |
Loading weighing system Decompresslon System |
MESSAGES
Add: No. 5, Nansi Road, Nanjin Village, Xindeng Town, Fuyang District, Hangzhou City, Zhejiang Province
E-mail：xujihuang@163.com
Contact：Xu Jihuang
Tel：86 15067189393 13867164700
hangzhou Xinmax Intelligent Technology Co., Ltd. 浙ICP备2022002447号-2
浙公网安备33018302001762号
Powered by www.300.cn SEO