新闻资讯_新闻资讯_EPS.EPP 、Mechanical and electrical equipment manufacturing—Hangzhou Xinmax Intelligent Technology Co., Ltd.

12-20 

What are the characteristics of EPS foam equipment machinery?

What are the characteristics of EPS foam equipment machinery? 1. Optimized redundant design of foam machinery, the whole machine is simple and clear, high strength and cost-effective. 2. Hydraulic system, stable operation, low noise and large clamping force. 3. The vacuum system speeds up product forming, shortens cooling time and reduces product moisture content. 4. Perfect fault self-diagnosis and motor protection system to ensure the safe operation and protection of the equipment. 5. The foam machinery can perform fully automatic, semi-automatic, intermediate start and manual operation in four ways. 6. The foam machinery adopts imported PLC, imported touch screen, full Chinese display, graphical interface intelligent control, and man-machine dialogue. 7. Foam plastic machinery has a variety of heating, cooling, filling, product release and other processes to adapt to different EPS products. 8. Adopt hot-dip galvanizing machine to strengthen anti-corrosion and greatly improve the service life of the machine.

12-20 

What are the advantages of foam cutting machines produced by professional manufacturers?

There are many professional foam cutting machines in the market. When you choose, in addition to the overall scope of use, you can also look at the advantages of the products produced and processed by professional manufacturers, and have a basic understanding After that, you can choose products normally, to ensure that you can get more support and recognition in the entire market, and you can buy products with confidence. The cutting machine processed by professional manufacturers works better. When we usually choose to buy, we must look at the effect of the foam cutting machine in the actual operation and use. In addition to safety, we also need to look at the convenience of operation and use. After understanding these basic conditions, naturally You can choose normally. Now many people understand these basic situations and feel that they are very popular in the entire market, and they can easily buy them. The cutting machine processed by professional manufacturers has a longer service life. When consumers choose to buy a cutting machine, they must look at the service life of the product. In addition to doing a good job in service, professional manufacturers can also ensure that the product is safer during use. efficiency will be more obvious. When we are actually paying attention, we all need to look at the overall market processing situation. The sales of foam cutting machines processed by professional manufacturers are very good in the current market. When purchasing, you can also look at the benefits brought by the product in the actual use process. By understanding the nature in detail, you can use the product with confidence, ensuring that you can also get more support and recognition from consumers in the market. .

01-21 

Advantages of foam box production equipment

The foam box is generally called "foam box", mainly refers to the expanded polystyrene (EPS) raw material processed by heating through the mold, and the packaged product is usually called "foam box" ;.

01-21 

Application of foam box equipment performance

Foam box equipment is widely used in real estate and chemical industry, used in chemical industry, environmental protection, floor board with wear resistance, vibration resistance, corrosion resistance, recyclability, high strength, anti-aging, waterproof, moisture-proof, not easy to deform, Repeated use and other characteristics, the cost is greatly reduced.

01-21 

How to repair EPS foaming machine

EPS foam cutting machine is mainly used for processing foam, sponge and other materials in the chemical industry. Now this laser is mainly used for cutting.

01-21 

How to choose eps foam machinery and equipment

Before choosing an eps device, we must make preparations. If the preparation is done well, the next selection will be smoother. But some people are in the process of making these preparations, and some people don't know much about the specific situation, so it is likely to have a great impact on us. Now let's further explain what preparations we need to do before choosing a device.

01-21 

What are the characteristics of foam box production equipment

Advantages of foam box production equipment: 1. Anti-aging and anti-corrosion performance: no obvious aging except for long-term exposure to high-energy radiation. Resistant to dilute acid, dilute alkali, methanol, lime, asphalt and other chemicals. 2. Lightweight: Use gas to replace part of the packaging product space, with 300-6 million independent sealed air bubbles per cubic decimeter. Therefore, it is several to ten times that of plastic. 3. Good sound insulation performance: its sound insulation mainly comes through two ways, one is to absorb sound energy and reduce reflection and transmission; the other is to eliminate and reduce noise. 4. Thermal insulation performance: The thermal conductivity is the weighted average of pure EPS (108 cal/M. H) and air thermal conductivity (about 90 cal/M. H). 5. Antistatic performance: Due to its low conductivity, it is easy to generate its own electrification during the friction process, which will not affect the products of ordinary users. For high-precision electronic products, especially modern electronic large-scale integrated structural components, electrostatic foam equipment boxes should be used. 6. Ability to absorb shock load: When the shock load acts, the gas in the foam consumes and dissipates the external energy through stagnation and compression, and the air bubble gradually terminates the shock load with a small negative acceleration, which has a good shock resistance effect. The reason why foam box production equipment is so popular is because it has many advantages, advantages and disadvantages. I believe that with the development of science and technology, the shortcomings will gradually be overcome.

01-21 

Are foam bricks produced with EPS building module equipment?

With the implementation of the green environmental protection concept and the national wall reform policy, land is protected, energy is saved, resources are comprehensively utilized, and the environment is improved. The new wall material has excellent characteristics such as foam, high strength, heat preservation, energy saving, soil saving and environmental protection.

01-21 

EPS building mold has the advantages of structure

EPS building mould has the advantages of safe and reliable structure. The structure has strong integrity and good seismic effect. In 2015, the Provincial Department of Housing and Urban-Rural Development released a collection of local standards and EPS module construction applications.

01-21 

The installation and debugging of the molding machine equipment requires professionals to carry out

Now, in order to improve production efficiency and reduce production costs, many enterprises will purchase automated production process equipment in order to better realize the development of enterprises. Among the many equipments, it is easy for the molding machine to choose a production equipment.