EPS foam cutting machine is mainly used for processing foam, sponge and other materials in the chemical industry. Now this laser is mainly used for cutting. The laser beam thin cutting is not easy to deform, the surface of the cut is smooth, and the edge is clear, and it has been widely used in various fields.

Naturally, during the use of EPS foam cutting machine, there will also be some failures and problems, which need to be repaired frequently. Next, let's talk about the maintenance method of EPS foaming machine. It should be reminded here that only people who know how to use and operate can repair and replace the foaming equipment.

To prevent accidents or machine damage, the following principles must be followed during inspections:

1. When the EPS foaming machine fails, the power supply should be disconnected immediately and the machine should be stopped.

2. When the EPS foaming machine cannot be used normally, check the relevant manuals, take correct measures, and turn off the power before checking and replacing the components.

3. The parts removed during the inspection should be replaced with the same new parts at the same location. Instruments used during inspections must be calibrated.

4. It is forbidden to place flammable or metal objects in electrical cabinets or junction boxes;

5. Check cables and wires regularly to prevent leakage or electric shock.